GRP 28ft Motor Sailer
- Barco REF# · 167452
- Eslora total · 8.53m
- Año · 1988
- Construcción · Fibra
- Perfíl de carena · Quilla corrida
- Camas · 2
- Motor · 1 x gasoil 30cv, Nanni ()
- Lugar · Rackheath, Norwich
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
| Lugar | Rackheath, Norwich |
|---|---|
| Capacidad de carburante | 60.0 ltr (13.2 G) Total - 1 Tanks |
| Capacidad de agua | 100.0 ltr (22.0 G) Total - 1 Tanks |
Sistemas Mecánicos
| Motor | 1 x gasoil 30cv |
|---|---|
| Marca del motor y el modelo | Nanni () |
| Horas de motor | Desconocido |
| Motor refrigerado por | Indirect |
| Gobierno | rueda |
| Propulsión | Eje/s |
| Helice(s) | 3 blade bronze |
| Consumo de carburante | 2.0 ltr (0.4 G) /hora A velocidad de crucero |
| Velocidad de crucero | 5 nudos |
Dimensiones
| Eslora total | 8.53m |
|---|---|
| Eslora de flotación | 8.53m |
| Manga | 2.74m |
| Calado mín. | 1.07m |
| Calado máx. | 1.06m |
| Espacio libre | 1.83m |
| Altura interior | 1.85m |
| Ubicación/Lugar | Seque almacenamiento |
Sistemas eléctricos
12 volt battery, 1 batteries charged by: motor, energía costera
Construcción
| Construction | Fibra |
|---|---|
| Perfíl de carena | Quilla corrida |
| Acabado | Pintura acabado |
GRP Motor Cruiser based on a Motor Sailor
Interiores
| Total # de literas | 2 |
|---|---|
| No. de literas únicas | 2 |
| Camarote(s) | 2 |
2 berths in Fwd cabin
Interiores
| Fregadero/Lavabo | |
|---|---|
| Nevera de hielo | |
| Nevera | |
| Alfombra/suelo | |
| Sistema de agua bajo presión | |
| Micro-ondas |
2 berths in Fwd cabin
Equipo de cubierta
Eléctrico molinete
1 Anclas
(Plough)
10.00m de cadena
Equipo de navegación
| Corredera | |
|---|---|
| Radar | |
| GPS | |
| Navtex | |
| Fax | |
| Luces de navegación |
Equipo de seguridad
1 Bombas de achique (0 manual / 1 eléctrico)
No BSC
Comentario del broker
This absolutely stunning vessel has been restored to a standard the likes of which I have never seen.
It really is that good. The current owner informs me he bought her as a "project" to work on over the winter 2 years ago. He owns a GRP moulding company within the marine environment and has put 100's of hours in to this boat over the past 2 years. The result really is amazing....She is now 90% finished and requires a gas cooker (microwave already fitted), a little wiring and a BSC to complete her.
My pictures were taken with her inside the workshop where she has sat and I apologise that I cannot do this boat justice.
You really do need to see this boat to appreciate the craftsmanship that has gone in to her. I valued her at 28k finished.
One not to be missed if you are looking for a boat that looks far better than new ever was. There has been a lot of thought gone in to the design in all areas.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.